luzes dos ponteiros permanentemente ligados
Página 1 de 1
luzes dos ponteiros permanentemente ligados
ILUMINAÇÃO DO PAINEL DE BORDO
(Para centralinas com Can-Bus )
1 – Função SELECT
2 – Função 17 – INSTRUMENTS
3 - Função ADAPTATION - 10
4 – Entrar no Canal 19
5 – O valor é formatado desta maneira :
0 – Nenhuma Iluminação Permanente
1 – Ponteiros Iluminados sem Interrupção
2 – Fundo Iluminados sem Interrupção
3 – Agulhas e Fundo Iluminados
ILUMINAÇÃO DO PAINEL DE BORDO
( outra maneira)
1 – Função SELECT
2 – Função 17 – INSTRUMENTS
3 - Função 07 – CODING (marcar o código original caso corra algo mal)
O digito da direita é para a iluminação de fundo do painel.
Está definido de origem para 3.
Mudar para 4 e o quadrante fica sempre ligado mesmo sem ligar as luzes.
Por exemplo, mudar de 0004203 to 0004204
4 – Clicar em “ DO IT "
Note: By doing this, you have now set both the pointers and number scales in the instrument cluster to be on at all times rather than being sensitive to ambient light with the photosensor. The reason for the factory setting is to provide a visual cue that you need to turn on your headlights. Having the instruments lit all the time defeats this. Do this mod at your own risk. FYI - the photosensor is the almost invisible circle on the speedometer face right at the high end of the scale.
(Para centralinas com Can-Bus )
1 – Função SELECT
2 – Função 17 – INSTRUMENTS
3 - Função ADAPTATION - 10
4 – Entrar no Canal 19
5 – O valor é formatado desta maneira :
0 – Nenhuma Iluminação Permanente
1 – Ponteiros Iluminados sem Interrupção
2 – Fundo Iluminados sem Interrupção
3 – Agulhas e Fundo Iluminados
ILUMINAÇÃO DO PAINEL DE BORDO
( outra maneira)
1 – Função SELECT
2 – Função 17 – INSTRUMENTS
3 - Função 07 – CODING (marcar o código original caso corra algo mal)
O digito da direita é para a iluminação de fundo do painel.
Está definido de origem para 3.
Mudar para 4 e o quadrante fica sempre ligado mesmo sem ligar as luzes.
Por exemplo, mudar de 0004203 to 0004204
4 – Clicar em “ DO IT "
Note: By doing this, you have now set both the pointers and number scales in the instrument cluster to be on at all times rather than being sensitive to ambient light with the photosensor. The reason for the factory setting is to provide a visual cue that you need to turn on your headlights. Having the instruments lit all the time defeats this. Do this mod at your own risk. FYI - the photosensor is the almost invisible circle on the speedometer face right at the high end of the scale.
Página 1 de 1
Permissões neste sub-fórum
Não podes responder a tópicos
|
|